HomeLaser ProjectsToolStand
timhatch27
timhatch27
Report
[Laser cut and engrave] Sunglasses Stand
Project made with S1 machine for Laser cut and engrave.
[Laser cut and engrave] Sunglasses Stand
[Laser cut and engrave] Sunglasses Stand

Sunglasses Stand

ID 7370
Instruction
Files
Original files
AuthorS1 · Birch Plywood
1
Preview
Preview
Add Make Profile
Same design, different machine, material, or any improvement · Earn 50 Credits
Tips for a great Make Profile →
Interlocking parts.

Cut to fit a specific material thickness. If you resize them or change thickness, run Resize slots in Studio first so they still fit together.

gift
56
615

Information

      If you don't like opening cases of your sunglass collection and want to personalize their storage location, I created a relatively simple project to get you started on organizing them into a quaint station.
BeIn30Creators

Instruction

1

Step1: Design the Station

Sunglasses Stand instruction: step 1 - Design the Station
Preview

The first thing is to design the box-like base and faceplate stand with corresponding holes for the sunglasses. 

I measured the width of the plywood with a caliper and found it to be roughly 5.89mm.

Therefore, I created a template for a cutout around the joining edges with the dimensions being 5.89mmX12mm.

You can make the side supports bigger or larger using the template rectangle to cut them out and array them 12mm out along the X or Y axis.

 

The two lines are my measurement guides. One for the width of the sunglass arms. One for the height necessary for each pair.

NOTE - make sure to measure your sunglass arms as they vary in size, width and height.

2

Step2: Cut a 12" by 16" piece of plywood and get to the Laser!

Sunglasses Stand instruction: step 2 - Cut a 12" by 16" piece of plywood and get to the Laser!
Preview

For this part you can get creative for the brand of sunglasses and the style. Use your creative freedom!

3

Step3: Put it together with glue and brad nails.

Sunglasses Stand instruction: step 3 - Put it together with glue and brad nails.
Preview
Sunglasses Stand instruction: step 3 - Put it together with glue and brad nails.
Preview

Glue and assemble the pieces.

Comments

Remixes

License

CC BY