Native Arrow

Step 1) This project starts with bringing in an SVG file that is un-grouped so it has full 100% control, with this control I simply moved the outside edge to the side so I could group ll the small pieces of the image together and group them. Then I moved the outside back in it's original position.

Step 2) Once I did this I also set the setting for the laser power and speeds, for all the pieces on the inside and for outside edge. inside will be scored and the outside will be cut.

Step 3) In this step all the setting are ready for the laser and a piece of plywood is installed into the D1 10w Pro. once the scoring and cutting is complete the painting begins.

Step 4) The cut and scored piece is plain without some paint so small acrylic pen style paint pens are used to paint the fine details these pens are invaluable to projects like these with really fine painting needs. Then finally finished native arrow ready to be hung on the wall for everyone's enjoyment.