InícioProjetos de LaserHome DecorClock
djbrandy64
djbrandy64
Denunciar
[Laser cut and engrave] Clock design
Project made with D1 Pro machine for Laser cut and engrave.
Project made with D1 Pro machine for Laser cut and engrave.
[Laser cut and engrave] Clock design
[Laser cut and engrave] Clock design
[Laser cut and engrave] Clock design
[Laser cut and engrave] Clock design

Clock design

ID 3359
Instrução
Arquivos
Arquivos originais
AutorD1 Pro · Birch Plywood
1
Preview
Preview
Preview
Adicionar Perfil de Fabricação
Mesmo design, máquina, material ou qualquer melhoria diferente · Ganhe 100 Créditos
Dicas para criar um ótimo Perfil de Fabricação →
gift
45
637

Informação

      This is a clock in memoriam of Mr. Buffet which I grew up listening to his music.  The great thing about this is you can change the numbers to standard numbers, but be careful on the double digit numbers they have to be a bit realigned as you set them.

Instrução

1

Etapa1

Unfortunately the "Pine Board" is not selectable...the cut is 12" x 12" which makes the alignment of all the numbers much better when you go from the center out.  I did drill a hole through the material to mount the clock kit (you can get a 1/2" or 3/4" kit).  I painted with paint markers that you can purchase at Wal Mart to get the fine lines painted.

Comentários

Remixes