HomeTemplatesDecorHome DecorWall Art
comp56
Report
[Laser cut and engrave] Large 2 layer Signs
Project made with xTool D1 Pro machine for Laser cut and engrave.
Project made with xTool D1 Pro machine for Laser cut and engrave.
[Laser cut and engrave] Large 2 layer Signs
Project made with xTool D1 Pro machine for Laser cut and engrave.
[Laser cut and engrave] Large 2 layer Signs
[Laser cut and engrave] Large 2 layer Signs
[Laser cut and engrave] Large 2 layer Signs
[Laser cut and engrave] Large 2 layer Signs
[Laser cut and engrave] Large 2 layer Signs

Large 2 layer Signs

Application scenario
Laser
Machine & module
xTool D1 Pro
10W
Material used
3mm Basswood Plywood (6pcs)
547

Information

      Here is one for the Extensions If you happen to have  Xtool D1 or D1 pro with extensions this can be achieved easily at this size. These signs are approx. 24"-30" long and approx. 9" wide. Top layer being 1/4" (6.3mm) birch and base layer your choice of pine, oak, walnut, maple 3/4" ( 19mm) at this size these signs are a real eye catcher.
Comments

Remixes

xTool Supplies Used in This Template

xTool D1 Pro
xTool D1 Pro
3mm Basswood Plywood (6pcs)
3mm Basswood Plywood (6pcs)