HomeTemplatesDecorHome DecorWall Art
jrpotocki
Report
[Laser cut and engrave] Gothic Buildings Blocks
Project made with xTool M1 machine for Laser cut and engrave.
Project made with xTool M1 machine for Laser cut and engrave.
[Laser cut and engrave] Gothic Buildings Blocks
Project made with xTool M1 machine for Laser cut and engrave.
[Laser cut and engrave] Gothic Buildings Blocks
[Laser cut and engrave] Gothic Buildings Blocks
[Laser cut and engrave] Gothic Buildings Blocks
[Laser cut and engrave] Gothic Buildings Blocks
[Laser cut and engrave] Gothic Buildings Blocks

Gothic Buildings Blocks

Instruction
Gothic Blocks.xcs
Gothic Blocks
.xcs
Application scenario
Laser (120min)
Machine & module
xTool M1
10W
Material used
3mm Basswood Plywood (6pcs)
3mm Basswood Plywood
21
285

Instruction

1

Step1: Cut out blocks

Gothic Buildings Blocks instruction: step 1 - Cut out blocks
Preview
Gothic Buildings Blocks instruction: step 1 - Cut out blocks
Preview

The houses and connectors are spread over three sheets.  Sheet 1 is connectors.  Sheet 2 contains most of the buildings, and sheet three has two more buildings and more connectors.  Cut which components you want.

2

Step2: Finish the Pieces

Gothic Buildings Blocks instruction: step 2 - Finish the Pieces
Preview

Paint or finish the pieces as you want.  I used colored paint markers in the yellow to purple range to be somewhat historically accurate,

Comments

Remixes

xTool Supplies Used in This Template

xTool M1
xTool M1
3mm Basswood Plywood (6pcs)
3mm Basswood Plywood (6pcs)
3mm Basswood Plywood
3mm Basswood Plywood

License

CC BY-NC