HomeTemplatesDecorHome DecorShelves & Holders
tpleo54
Report
[Laser cut and engrave] Paint bottle holder
Project made with xTool S1 machine for Laser cut and engrave.
Project made with xTool S1 machine for Laser cut and engrave.
[Laser cut and engrave] Paint bottle holder
Project made with xTool S1 machine for Laser cut and engrave.
[Laser cut and engrave] Paint bottle holder
Project made with xTool S1 machine for Laser cut and engrave.
[Laser cut and engrave] Paint bottle holder
[Laser cut and engrave] Paint bottle holder
[Laser cut and engrave] Paint bottle holder
[Laser cut and engrave] Paint bottle holder
[Laser cut and engrave] Paint bottle holder
[Laser cut and engrave] Paint bottle holder

Paint bottle holder

Instruction
paintholder.xcs
paintholder
.xcs
Application scenario
Laser
Machine & module
xTool S1
40W
Material used
3mm Basswood Plywood (6pcs)
3mm Basswood Plywood
170
1357

Information

      A simple paint holder that is stackable
The last picture is using paintholder3 file. It is also stackable just make 2 of them.

Instruction

1

Step1: Design

Design the way you want your project made. I used an online box creator then tweaked it to suit my needs. I used boxes.py to get the basic build.

2

Step2: Send to machine

Paint bottle holder instruction: step 2 - Send to machine
Preview

Don't forget to resize your tab holes if you are using a different material. If your paint bottles are a different size, you can resize the holes also.

3

Step3: Cut it all out

Paint bottle holder instruction: step 3 - Cut it all out
Preview

After cutting remove and check for fit.

4

Step4: glue and clamp

Paint bottle holder instruction: step 4 - glue and clamp
Preview

Glue it all together.

Comments

Remixes

xTool Supplies Used in This Template

xTool S1
xTool S1
3mm Basswood Plywood (6pcs)
3mm Basswood Plywood (6pcs)
3mm Basswood Plywood
3mm Basswood Plywood

License

CC0