Report
![[Laser cut and engrave] Small Christmas Gnome Figurine](https://storage-us.atomm.com/resource/xtool%2Fcommunity%2Fmaking%2Fb4d7c1e1-d935-4073-aa39-72413f9cb473%2F20231209_142430.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Small Christmas Gnome Figurine
GnomeWithTree
.xcs
Application scenario
Laser (1min)
Machine & module
xTool S1
20WMaterial used
Poplar
3mm Basswood Plywood (6pcs)
12mm Poplar
3mm Basswood Plywood
87
570
Information
This little guy was created with 1/2" poplar wood and 3mm basswood plywood and all the cut shapes were painted separately and then glued onto the backing.
Comments