HomeTemplatesDecorHome DecorDesk Decor
kdward30
Report
[Laser cut and engrave] Jewelry Stand
Project made with xTool P2 machine for Laser cut and engrave.
Project made with xTool P2 machine for Laser cut and engrave.
[Laser cut and engrave] Jewelry Stand
Project made with xTool P2 machine for Laser cut and engrave.
[Laser cut and engrave] Jewelry Stand
Project made with xTool P2 machine for Laser cut and engrave.
[Laser cut and engrave] Jewelry Stand
Project made with xTool P2 machine for Laser cut and engrave.
[Laser cut and engrave] Jewelry Stand
Project made with xTool P2 machine for Laser cut and engrave.
[Laser cut and engrave] Jewelry Stand
Project made with xTool P2 machine for Laser cut and engrave.
[Laser cut and engrave] Jewelry Stand
Project made with xTool P2 machine for Laser cut and engrave.
[Laser cut and engrave] Jewelry Stand
Project made with xTool P2 machine for Laser cut and engrave.
[Laser cut and engrave] Jewelry Stand
Project made with xTool P2 machine for Laser cut and engrave.
[Laser cut and engrave] Jewelry Stand
Project made with xTool P2 machine for Laser cut and engrave.
[Laser cut and engrave] Jewelry Stand
Project made with xTool P2 machine for Laser cut and engrave.
[Laser cut and engrave] Jewelry Stand
Project made with xTool P2 machine for Laser cut and engrave.
[Laser cut and engrave] Jewelry Stand
Project made with xTool P2 machine for Laser cut and engrave.
[Laser cut and engrave] Jewelry Stand
Project made with xTool P2 machine for Laser cut and engrave.
[Laser cut and engrave] Jewelry Stand
Project made with xTool P2 machine for Laser cut and engrave.
[Laser cut and engrave] Jewelry Stand
Project made with xTool P2 machine for Laser cut and engrave.
[Laser cut and engrave] Jewelry Stand
Project made with xTool P2 machine for Laser cut and engrave.
[Laser cut and engrave] Jewelry Stand
Project made with xTool P2 machine for Laser cut and engrave.
[Laser cut and engrave] Jewelry Stand
Project made with xTool P2 machine for Laser cut and engrave.
[Laser cut and engrave] Jewelry Stand
Project made with xTool P2 machine for Laser cut and engrave.
[Laser cut and engrave] Jewelry Stand
[Laser cut and engrave] Jewelry Stand
[Laser cut and engrave] Jewelry Stand
[Laser cut and engrave] Jewelry Stand
[Laser cut and engrave] Jewelry Stand
[Laser cut and engrave] Jewelry Stand
[Laser cut and engrave] Jewelry Stand
[Laser cut and engrave] Jewelry Stand
[Laser cut and engrave] Jewelry Stand
[Laser cut and engrave] Jewelry Stand
[Laser cut and engrave] Jewelry Stand
[Laser cut and engrave] Jewelry Stand
[Laser cut and engrave] Jewelry Stand
[Laser cut and engrave] Jewelry Stand
[Laser cut and engrave] Jewelry Stand
[Laser cut and engrave] Jewelry Stand
[Laser cut and engrave] Jewelry Stand
[Laser cut and engrave] Jewelry Stand
[Laser cut and engrave] Jewelry Stand
[Laser cut and engrave] Jewelry Stand
[Laser cut and engrave] Jewelry Stand
[Laser cut and engrave] Jewelry Stand
[Laser cut and engrave] Jewelry Stand

Jewelry Stand

JewelryBatSatan (2).xcs
JewelryBatSatan (2)
.xcs
Application scenario
Laser (20min)
Machine & module
xTool P2
55W
Compatibles · 5
Material used
3mm Basswood Plywood (6pcs)
3mm Basswood Plywood
243
2068

Information

      A jewelry stand in the cute design of a bat.  It can hold earrings, necklaces, bracelets and even rings
Comments

Remixes

xTool Supplies Used in This Template

xTool P2
xTool P2
3mm Basswood Plywood (6pcs)
3mm Basswood Plywood (6pcs)
3mm Basswood Plywood
3mm Basswood Plywood