Espresso Dosing Funnel Hook
Instruction
Information
I'm a big fan of espresso and definitely need to use a dosing funnel; otherwise, it just gets everywhere. So, I designed a way to hold one.
103/312
Instruction
Step1: Design 1
The first part was making the backing. The only thing you need is to make a square. Then I made another square and used the addition node function to make the hook. It's definitely not the easiest, but it is worth it.
Step2: Design 2
Next, I made the holes in the backing that would fit the hook, and that should do it. The whole design is finished.
Step3: Material
For this, I used basswood, but you can change the material. Just make sure that you change your settings.
Step4: laser Time
Laser time! Just remember before lasing that you will need to change the settings to fit your machine, especially if you use a different material. And as always, remember your laser safety glasses.
Step5: Assembly
Now it's time to glue. All you need to do is glue the base to the hook, and you should be good to go.
Step6: You're Done
Good news, you're done with your dosing hook. Good job!
