Dirt Cake Recipe
Instruction
Information
Dirt Cake recipe on a shovel
Instruction
Step1: Load the file into the XCS software
Choose the shovel with the dirt cake recipe on it. Make sure the red is set to cut and the black is set to engrave. The settings that is preloaded are for the S1 40w, if using a different machine please adjust your settings. Also before you process the file make sure the other parts of the files are not selected. then click on Process. You will also want to move the gummy worms to a workable area so that is will cut these out at the same time.
Step2: cut out the 2nd layer boarder
When the engrave and the shovel, gummies are complete, click to change the output to be grayed out so it will not try to run this section again. Move the 2nd layer boarder to the work area and change the output to green and process this portion
Step3: Stain 2nd layer and paint gummies
Take the 2nd layer and stain it, then get the gummies and I painted them with acrylic paint. choose color of your choice. When it dries glue them on the shovel where you would like them along with the 2nd layer boarder. It is now complete.
