MUG

Install the pink cutting mat, paste the PU Heat Transfer Vinyl and install the point blade.Import the file into the XCS software, connect the device and adjust the pattern size according to the actual material.Then cut the PU Heat Transfer Vinyl.

Notes

1.PU Heat Transfer Vinyl is cut from the back and then transferred print to the front, so remember choose the 【reflect】 when you cutting graphics such as text.

2.Pay attention to the cutting range, the cutting area can not exceed the scope of PU Heat Transfer Vinyl. Otherwise, it is easy to damage the bottom of the cutting mat.

Heat print transfer on the mug after cutting the PU Heat Transfer Vinyl.Set the temperature to 270℃ and only need 30 seconds, such a unique mug is completed!