Denunciar

[Laser cut and engrave] DIY Risers — Project made with M1 machine for Laser cut and engrave.

DIY Risers

ID 78

Instrução

Arquivos

Arquivos originais

AutorM1 · 1/8"(3mm) Basswood Plywood

Adicionar Perfil de Fabricação

Mesmo design, máquina, material ou qualquer melhoria diferente · Ganhe 100 Créditos

Dicas para criar um ótimo Perfil de Fabricação →

Peças entrelaçadas.

Corte para se ajustar à espessura específica do material. Se você redimensionar ou alterar a espessura, execute Redimensionar slots no Studio primeiro para garantir que eles ainda se encaixem.

157

3020

Informação

DIY

Risers

Basswood

Instrução

Etapa1

Pré-visualização

This project is used to make risers for xTool M1. They can be used when you are to connect a Rotary Attachment to xTool M1 or xTool M1 is to work in open plane mode.

Note

Basswood 3mm is used for processing. You can also use other wood boards of thickness 3mm for processing (The tightness of fitting the wood pieces together may differ due to differences in the tolerance of materials).

Introduction to the risersA riser consists of three parts:- Top part: fit on the top of a riser, where a support of xTool M1 is placed.- Middle part: fit in the middle of a riser, multiple ones can be used.- Bottom part: fit at the bottom of a riser, coming into contact with a desk or floor.

Etapa2

Pré-visualização

software operation（1）Import designing documents:This project contains three canvases，all documents need to be processed。（2）Setting:Select the type of the material to be processed, and determine whether to use triangular prisms.Select all the design elements, and select Cut.

Etapa3

Pré-visualização

Assemble the top part（1）Parts List：- 1 * Roof 1- 2 * Roof 2- 4 * Pin 2- 4 * Pin 3（2）Assemble Fit Roof 1 on Roof 2, and insert Pins 2 into the slots of Pins 3.Insert the pin structures into the slots of roofs. The assembly is done.

Etapa4

Pré-visualização

Assemble the middle part（1）Parts List：- 4 * Side 1- 4 * Side 2- 4 * Side 3- 4 * Side 4- 4 * Pin 1（2）AssembleFit two Sides 1 and two Sides 2 together with two Sides 2 in the middle, and fit two Sides 3 and two Sides 4 together with two Sides 4 in the middle, as shown in the following figure.Fit the structures together.Insert pins into the structure to complete the installation.

Etapa5

Pré-visualização

Assemble the bottom part（1）Parts List：- 4 * Side 1- 4 * Side 2.1- 4 * Side 3- 4 * Side 4.1（2）AssembleFit two Sides 1 and two Sides 2.1 together with two Sides 2.1 in the middle, and fit two Sides 3 and two Sides 4.1 together with two Sides 4.1 in the middle, as shown in the following figure.Fit the structures together.