Denunciar

[Laser cut and engrave] Xtool Grid — Project made with D1 Pro machine for Laser cut and engrave.

[Laser cut and engrave] Xtool Grid — Project made with D1 Pro machine for Laser cut and engrave.

[Laser cut and engrave] Xtool Grid

[Laser cut and engrave] Xtool Grid

Xtool Grid

ID 3518

Instrução

Arquivos

Arquivos originais

AutorD1 Pro · Apple Green Stainless Steel Tumbler with Handle (24oz), 1/2" Plywood

1

Adicionar Perfil de Fabricação

Mesmo design, máquina, material ou qualquer melhoria diferente · Ganhe 100 Créditos

Dicas para criar um ótimo Perfil de Fabricação →

gift

214

1964

Informação

      A grid for lining up materials on your laser

Instrução

1

Etapa1: Material needs

I purchased a 24" x 24" piece of sanded birch plywood from my local hardware store and a set of Xtool laser retaining feet from an online marketplace. Next I installed the retainer legs onto the plywood and put my Xtool in the feet.

2

Etapa2: Setup

Pull up the file and enter the listed settings

3

Etapa3

Hit the Process button and click on center for the starting parameter. Run the file.

Comentários

Remixes