Report

[Laser cut and engrave] Easter Light / Pencil holder — Project made with M1 machine for Laser cut and engrave.

Easter Light / Pencil holder

ID 7362

Instruction

Files

Original files

AuthorM1 · Birch Plywood

Add Make Profile

Same design, different machine, material, or any improvement · Earn 100 Credits

Tips for a great Make Profile →

Interlocking parts.

Cut to fit a specific material thickness. If you resize them or change thickness, run Resize slots in Studio first so they still fit together.

480

Information

      Easter is the perfect time to create something with a light! 
It's even more special when you can use the light in other ways. This Easter Light is not only customizable but also functions as a pencil holder.

BeIn30Creators

Easter

Instruction

Step1: Customize the design Files

Preview

This pencil holder can be customized in design. I really like the straight openings, but the three walls with patterns can also be decorated with flowers or something else. The fourth page is also customizable. Here I chose an Easter motive. The dxf files are also attached. If you want to use a different motive, all you have to do is remove the corresponding lines in the software and insert your own design.

Step2: Building and Use

Preview

Assembling the parts is relatively simple. The rectangular part goes at the bottom. The four walls are attached to the sides. I use superglue to attach the individual parts. When the pencil holder is assembled, a candle can cast a beautiful light through the walls (especially in the evening).

ATTENTION: When using a candle without its own glass, the fire hazard of the material must be taken into account!

Comments