Report

[Laser cut and engrave] Rock it with XTool — Project made with S1 machine for Laser cut and engrave.

[Laser cut and engrave] Rock it with XTool — Project made with S1 machine for Laser cut and engrave.

[Laser cut and engrave] Rock it with XTool — Project made with S1 machine for Laser cut and engrave.

[Laser cut and engrave] Rock it with XTool

[Laser cut and engrave] Rock it with XTool

[Laser cut and engrave] Rock it with XTool

Rock it with XTool

Instruction

Files

Original files

AuthorS1 · Pine Wood, 1/4"(6mm) Pine Plywood

1

Add Make Profile

Same design, different machine, material, or any improvement · Earn 100 Credits

gift

256

Information

      A few rocks and an XTool.

Instruction

1

Step1: Set the shape and thickness of your rock.

The main thing to remember is to take it slow and use multiple passes if needed.

2

Step2

Put painters tape around the rock. It helps stop chipping and helps protect your machine. It is better to lower your settings and do multiple passes if needed.

3

Step3

Once you have the desired effect remove rock and tape. Simple as that.

Comments

Remixes

License