Mister Monster

Report

[Laser cut and engrave] Ralphy — Project made with D1 Pro machine for Laser cut and engrave.

Ralphy

Instruction

Files

Original files

AuthorD1 Pro · 2mm basswood

Add Make Profile

Same design, different machine, material, or any improvement · Earn 100 Credits

552

Information

      Ralphy Finkerton is proudly piloting a custom Bloingy 77
fighter bomber. Problem is Ralphy so learned to love his
bomb that he won't drop it.

Instruction

Step1: load file Ralphy.xcs

Preview

insure that layer (color) settings are correct for your machine and the 2mm basswood material

Step2: load material and run file

Preview

tape down 2mm 12x12 basswood sheet with to prevent bow

orient the wood grain sideways as shown

Step3: offload and sand

Preview

sand with 180 grit paper to remove burn

Ralphy like smooooth (also stain and urethane)

Step4: main assembly

Preview

place 2 body pieces together back to back

insert strut into lower body slot

insert wing into body slot until it touches strut

insert cockpit into body slot until it touches wing back

insert nose into body slot until it touches strut

insert windshield into body slot until it touches nose

Step5: final assembly

Preview

inset tail into body slot until it touches cockpit back

insert bomb tail into bomb back

place 2 wheel pieces together back to back

insert lug into center hole and insert wheel assembly onto strut

assembly prop to body with 2 prop nose pieces

Comments

Remixes

License

CC BY

Ralphy

Information