HomeLaser&Cut ProjectsKitchenWine Box
iriiz.zamora
iriiz.zamora
Report
[Laser cut and engrave] Wine Box
Project made with D1 Pro machine for Laser cut and engrave.
[Laser cut and engrave] Wine Box
[Laser cut and engrave] Wine Box

Wine Box

ID 5221
Instruction
Files
Original files
AuthorD1 Pro · 1/8"(3mm) MDF Board
1
Preview
Preview
Add Make Profile
Same design, different machine, material, or any improvement · Earn 100 Credits
Tips for a great Make Profile →
gift
32
653

Information

      I cut a sheet of mdf to size of 40 cm by 10 cm for the lid of the box, there would be the margin to engrave our design, once created with images and text to my liking, I sent it to the design space and put the measurements From 10 cm wide to whatever the height ratio was, I defined the material as 3mm MDF and centered it to adjust the scan, the design took 8 minutes to be ready and we filled our box with our favorite items.

Instruction

1

Step1: wine box

I cut a sheet of mdf to size of 40 cm by 10 cm for the lid of the box, there would be the margin to engrave our design, once created with images and text to my liking, I sent it to the design space and put the measurements From 10 cm wide to whatever the height ratio was, I defined the material as 3mm MDF and centered it to adjust the scan, the design took 8 minutes to be ready and we filled our box with our favorite items.

2

Step2

I cut a sheet of mdf to size of 40 cm by 10 cm for the lid of the box, there would be the margin to engrave our design, once created with images and text to my liking, I sent it to the design space and put the measurements From 10 cm wide to whatever the height ratio was, I defined the material as 3mm MDF and centered it to adjust the scan, the design took 8 minutes to be ready and we filled our box with our favorite items.

3

Step3

I cut a sheet of mdf to size of 40 cm by 10 cm for the lid of the box, there would be the margin to engrave our design, once created with images and text to my liking, I sent it to the design space and put the measurements From 10 cm wide to whatever the height ratio was, I defined the material as 3mm MDF and centered it to adjust the scan, the design took 8 minutes to be ready and we filled our box with our favorite items.

Comments

Remixes