Report

[Laser cut and engrave] Tiny Christmas Baubles — Project made with F1 machine for Christmas.

Tiny Christmas Baubles

ID 4424

Instruction

Files

Original files

AuthorF1 · Glass

Add Make Profile

Same design, different machine, material, or any improvement · Earn 100 Credits

Tips for a great Make Profile →

741

Information

      I needed a few quick last-minute gifts for the office. These tiny baubles are vector engraved and filled with a few drops of acrylic paint to coat the interior.

ChristmasCreations

Instruction

Step1: measure bauble

Use calipers to ensure size.

Step2: insert into rotary chuck

Gently remove the cap from the bauble, and insert the ornament carefully into the rotary attachment. Check focus.

Step3: frame and engrave

frame to check placement. engrave with IR 85%/400 speed/300lpi

Step4: fill with paint

Put a couple of drops of acrylic paint inside. It may help to add a few drops of water to thin so it coats evenly.

Step5: drain and dry

Turn upside down to allow extra paint to drain out. Let dry. Replace the cap and enjoy!

Comments

Tiny Christmas Baubles

Information