![[Laser cut and engrave] Sterling Silver Ring](https://image-res.atomm.com/resource/xtool/community/attachment/xtool-community/82ece081-d0e3-415a-898b-f32365993c6d/butterflyRing.png?x-oss-process=image/resize,m_fill,w_160,h_120,limit_0/interlace,1/format,webp/auto-orient,1)
Sterling Silver Ring

Information
A friend asked me to engrave her sterling silver ring with smiley faces. I also tested with butterflies on my own. Both designs are included in the file.
Instruction
Step1: 确定您的尺码
Measure your ring. You'll need the width and the circumference.
Create a rectangle using these two measurements.
Turn off output as this will only be used for organizing the design.
Step2: Designing the Ring


Fill your rectangle with your desired design.
I made two with butterflies and smiley faces but you can use anything. I don't suggest using too complicated of a design as this is going to be very small and we want it to be clear.
Each ring may vary a little so don't forget to check the circumference each time.
Set the designs to Engrave.
Step3: Set Up Your Environment

Set your machine to rotary attachment.
Use the chuck setting and use the metal pieces for your chuck as those hold jewelry well.
Enter your perimeter (circumference). Mine is 70mm.
I set power to 80 and speed to 400mm/s
Step4: Alignment and Engraving




Set your rotary so that the measurement lights are at the highest point of the ring
Refresh the camera on the Ultra
Use the picture to align your design with the green line.
Make sure the rectangle has Output set to off.
You are ready to engrave.
Remixes
License
Related Project
You may also like
Wedding rings with flowers
Family Rings

Little Wooden Mushroom Ring

Colorful Wooden Mushroom Ring

Personalized Ring

Flower Ring

Colorful Striped Ring

Dime on Ring (Diamond Ring)

Personalised Engraving for Sterling Silver Cufflinks
Heart Ring
Love Wedding Rings

Leather Ring Carrier
F1 Ultra Engraved Brass Ring
F1 Ultra Engraved Ring

Acrylic Flower or Heart Ring.

Love Wooden Ring


